Semi Automatic Thermoforming Machine
ECOSA Series
Semi Automatic Thermoforming Machine
EPTL’s ECOSA models are a semi-automatic range of machines equipped with
single forming stations and double hot Press station. This machine is
specifically designed for production of high-quality tableware products
made from fiber pulp in the form of slurry.
ECOSA Series
USP of ECOSA series
ECOSA10095
Model ECOSA-10095-HPN-40T-DS
Output of up to 500 kg per day per machine.
Oil Heated/Electric Heated
ECOSA7565
Model ECOSA-7565-HPN-30T-DS
Output of up to 300 kg per day per machine.
Oil Heated/Electric Heated
ECOSA5545 SAMPLING MACHINE (single hot press)
Model-ECOSA-5545-HPN-20T-SS
Output of up to 100 kg per day per machine.
Electric Heated
Technical Specifications
|
PARTICULAR |
ECOSA-7565 |
ECOSA-10095 |
|---|---|---|
|
PLATEN SIZE |
750*650 MM |
1000*950 MM |
|
MACHINE SIZE (L*W*H) |
3200*1470*3400 MM |
3900*1865*3400 MM |
|
OPERATION TYPE |
SEMI-AUTOMATIC |
SEMI-AUTOMATIC |
|
FORMING TYPE |
GRAUTING/DIP FORMING |
GRAUTING/DIP FORMING |
|
PRESS MECHANISM |
HYDROPPNEUMATIC CYLINDER |
HYDROPPNEUMATIC CYLINDER |
|
HEATING TYPE |
ELECTRIC/THERMIC |
ELECTRIC/THERMIC |
|
PRODUCT TYPE |
PLATES,BOWLS,TRAY |
MEAL TRAY,PLATES |
|
CYCLE TIME |
35-40 SEC |
35-40 SEC |
|
AIR CONSUMPTION |
25 CFM |
35 CFM |
|
PRODUCTION |
UP TO 300 KG/DAY |
UP TO 500 KG/DAY |
Semi Automatic Thermoforming Machine
Semi Automatic Thermoforming Machine is a cost-effective solution designed for producing high-quality fiber-based tableware. Tailored for small to medium-sized enterprises, it combines reliable performance with operational simplicity.
Key Features:
Low Maintenance Requirements: Fewer components mean reduced downtime and lower maintenance expenses.
Efficient Hydro-Pneumatic Operation: Utilizes hydro-pneumatic cylinders for reliable and consistent forming performance.
User-Friendly Interface: Easy-to-operate controls reduce the learning curve and require minimal operator training.
ECOFA Series
Technical Specifications
| Fixed Parameters | Fixed Parameters | ||
|---|---|---|---|
| Machine Name | UOM | Semi-Automatic Fiber PulpmoldingTableware Machine (Model A : ECOSA10095) | Semi-Automatic Fiber Pulpmolding Tableware Machine (Model B: ECOSA7565) |
| Parameters (Model No.) | ECOSA-10095 | ECOSA-7565 | |
| Pulp Molding Capacity | kg/Day | 500 | 300 |
| Mold Platten Length | mm | 1000 | 750 |
| Mold Platten Depth | mm | 950 | 650 |
| Mold Platten Area | mm² | 950000 | 487500 |
| Operation Type | Manual | Manual | |
| Method of Forming | Measured feed by Grouting | Measured feed by Grouting | |
| Method of Hot Pressing & Drying | Hot Pressing done by Hydropneumatic Cylinder | Hot Pressing done by Hydropneumatic Cylinder | |
| Hydraulic Pressing Force | Ton | 40 | 30 |
| Min Shut Height | mm | 250 | 250 |
| Product Depth | mm | <85 | <90 |
| Product Thickness | mm | <2.5 | <2.5 |
| Compressed Dry Air Requirement | Bar | 6 | 6 |
| Compressed Dry Air Requirement | CFM | 35 | 25 |
| Vacuum Requirements | m³/min | 10 | 5 |
| Vacuum Requirements | mm Hg | 500 -ve | 500 -ve |
| Heating Method -1 | Electricity | Electricity | |
| Electric Heating Load | KW | 120 | 60 |
| Heating Method -2 | Thermic Oil | Thermic Oil | |
| Oil Heating Load | KW | 0.3 | 0.3 |
| Heating Requirement | Kcal/Hr | 100000 | 55000 |
| Mold Oil Inlet Temperature | ºC | 240±10 | 240±10 |
| Machine Size-Lx WxH | mm | 3900 x 1865 x 3400 | 3200 x1470 x 3400 |
| Machine weight | kg | 8000-Apprpx | 6000-Approx |
| Control Cabinet | Control cabinet consist of PLC, HMI & PID | Control cabinet consist of PLC, HMI & PID | |
| Material of construction | M.S with SS-304 cladding | M.S with SS-304 cladding |
ECOFA Series
Technical Parameters
| Parameters | UOM | ECOFA-12085 |
|---|---|---|
| Parameters | UOM | ECOFA-12085 |
| Pulp Molding Capacity | kg/Day | 750 |
| Mold Platten Length | mm | 1200 |
| Mold Platten Depth | mm | 850 |
| Mold Platten Area | mm² | 1020000 |
| Method of Forming | dip forming | |
| Method of Hot Pressing & Drying | Hot Pressing done by Hydropneumatic Cylinder | |
| Hydraulic Pressing Force | Tons | 60 |
| Min Shut Height | mm | 250 |
| Product Depth | mm | <100 |
| Product Thickness | mm | <3 |
| Compressed Dry Air Requirement | Bar | 6.5 |
| Compressed Dry Air Requirement | CFM | 60 |
| Vacuum Requirements | m³/min | 14 |
| Vacuum Requirements | mm Hg | 500 -ve |
| Heating Method -1 | Oil Heating | |
| Heating Load-1 | 15 | |
| Heating Method -2 | Electric Heating | |
| Heating Load-2 | KW | 150 |
| Heating Requirement | Kcal/Hr | 140000 |
| Mold Oil Inlet Temperature | ºC | 240±10 |
| Control System | Control cabinet consist of PLC, HMI & PID | |
| Machine Size-Lx WxH | mm | |
| Machine weight | kg | |
| Material of construction | MS with SS-304 clading |
| Parameters | UOM | ECOFA-1311 |
|---|---|---|
| Parameters | UOM | ECOFA-1311 |
| Pulp Molding Capacity | kg/Day | 850 |
| Mold Platten Length | mm | 1250 |
| Mold Platten Depth | mm | 1050 |
| Mold Platten Area | mm² | 1312500 |
| Method of Forming | dip forming | |
| Method of Hot Pressing & Drying | Hot Pressing done by Hydropneumatic Cylinder | |
| Hydraulic Pressing Force | Tons | 60 |
| Min Shut Height | mm | 250 |
| Product Depth | mm | <100 |
| Product Thickness | mm | <3 |
| Compressed Dry Air Requirement | Bar | 6.5 |
| Compressed Dry Air Requirement | CFM | 60 |
| Vacuum Requirements | m³/min | 14 |
| Vacuum Requirements | mm Hg | 500 -ve |
| Heating Method -1 | Oil Heating | |
| Heating Load-1 | 15 | |
| Heating Method -2 | Electric Heating | |
| Heating Load-2 | KW | 150 |
| Heating Requirement | Kcal/Hr | 140000 |
| Mold Oil Inlet Temperature | ºC | 240±10 |
| Control System | Control cabinet consist of PLC, HMI & PID | |
| Machine Size-Lx WxH | mm | |
| Machine weight | kg | |
| Material of construction | MS with SS-304 clading |
